xTool Air Compressor and Air Dryer
Air compressor and air dryer system for clean, dross-free metal cutting with the xTool MetalFab CNC table. Lets you cut with compressed air instead of expensive nitrogen, argon or oxygen cylinders.
| Weight | 18 kg |
|---|
1,910.59€Be PVM: 1,579.00€
Pre-order. Delivery time: 10 business days
Description
The “xTool Selected Air Compressor & Air Dryer” system is the most cost-effective and efficient gas solution for clean, slag-free metal cutting with the “xTool MetalFab” CNC table. The combination of a compressor and a dryer allows you to completely eliminate the need for expensive, quickly depleted nitrogen, argon, or oxygen cylinders and use free compressed air instead. Make a one-time investment—cut without additional gas costs for the entire service life.
ESSENTIAL CONDITION FOR USE: The air compressor and air dryer MUST be used simultaneously. The air supplied by the compressor must pass through the dryer’s filtration system to ensure that only completely dry and clean air reaches the laser head. This ensures optimal cutting quality and protects the expensive optics from damage.
Key Benefits:
Save more than €20,000 per year: A single 40-liter nitrogen cylinder is used up in just 30 minutes of continuous cutting. Based on 4 hours of daily operation (248 days per year, with nitrogen costing ~€0.30/L), switching to compressed air saves over €20,000 annually.
Perfect 4 mm metal cutting at 6 bar: When used in combination with the “xTool SaveGas™” telescopic nozzle, a pressure of just 6 bar (0.6 MPa) is sufficient to achieve results equivalent to cutting with 12 bar of nitrogen:
4 mm stainless steel (smooth, slag-free cut)
4 mm aluminum (smooth, slag-free cut)
3 mm brass (smooth, slag-free cut)
“HyperPure™” 3-stage industrial filtration system:
99% moisture removal: Dew point reaches 2–10°.
99.999% oil removal: Purifies to a concentration of 0.01 ppm.
99.999% dust/rust removal: Particles are removed down to 0.01 ppm.
Extremely fast pressure build-up (45 s): Thanks to its 2,200 W motor and 20 L receiver, the compressor builds pressure from 0 to 10 bar in just 45 seconds, ensuring an uninterrupted air supply.
Compact and portable (0.066 m³): The unit takes up little space in the workshop (the compressor weighs 16 kg, the dryer 10.8 kg), making it easy to move by hand.
Industrial durability: The system is designed for reliable operation for up to 2,400 hours across a wide temperature range from -10 °C to 40 °C.
Technical Specifications:
1. xTool Selected Air Compressor:
Maximum pressure: 10 bar (1.0 MPa)
Operating pressure: 6.0–7.9 bar (0.60–0.79 MPa)
Maximum air flow: 12.4 SCFM (350 L/min)
Tank capacity: 20 L
Motor power: 3.0 HP (2200 W)
Pressure build-up time (0–10 bar): 45 s
Dimensions / Weight: 460 mm × 530 mm × 270 mm / 16 kg
Input voltage: 220 V
Hose connection diameter: 10 mm
Operating temperature: -10 °C to 40 °C
2. xTool Selected Air Dryer:
Filtration efficiency: 99% moisture removal, 99.999% oil and dust removal
Maximum allowable air flow: 14.1 CFM (400 L/min)
Maximum allowable pressure: 12.5 bar (1.25 MPa)
Dew point: 2 °C ~ 10 °C
Maximum inlet air temperature: 45 °C
Rated power / Current: 0.51 HP (380 W) / 220 V; 2.6 A
Dimensions / Weight: 402 mm × 355 mm × 227 mm / 10.8 kg
Hose connection diameter: 10 mm
Operating temperature: -10 °C to 40 °C









