AEON MIRA S 5/7/9
- Class 1 Laser standard. Meets the Class 1 Laser safety standard: the entire housing is fully sealed to prevent cutting fumes from passing through the gaskets.
- ALL IN ONE system. The laser machines already have improved water cooling, a smoke fan and an air pump (Optionally, a oil-free external compressor for clean cuts), so they will not need to be retrofitted externally. Improved cooling and fume extraction will make batch production easier and more efficient.
- Door for material passage. The rear of the machine is equipped with a door which, when opened, allows longer materials to be fed through and processed.
- Built-in camera. The integrated camera allows you to position materials on the workbench even more quickly and easily.
- Magnetic lens holder. Lens maintenance is now even easier – instead of the usual screws, the lens is now held in place by a magnet.
- Multifunctional workbench. Now you can both engrave and cut on the same honeycomb and aluminium cutting table.
- Protected rails. The rails and bearings are fully protected from possible dirt or dust, reducing the frequency of servicing.
- Aesthetic and modern design. AEON’s distinctive machine tool design has taken the next step in the evolutionary process. Not only are the linear rails and bearing blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading outside your working area.
- Intelligent diagnostic system. The operational status of laser machines is available through a highly intelligent detection and diagnosis system. Some of the most important parameters, such as water temperature, flow rate, air pressure, can be accessed via the control panel.
- Even faster engraving. Engraving speeds of 1200 mm/s with a CO2 source and up to 4000 mm/s with an RF source!
- Warranty 24 months.
Description
Meet the AEON MIRA S series laser engraving and cutting machines. A number of improvements and simplifications have been introduced from the regular MIRA series. One of the big improvements is the integrated high-quality camera, which makes it much easier to position materials on the workbench. There is now an additional drawer at the rear of the machine, which can be opened to allow longer materials to be fed through, making them even easier to cut or engrave. The ALL IN ONE system will make mass production much easier and more efficient. The MIRA S series is equipped with a magnetic lens, making maintenance much easier and faster. The laser machines in this series are even more adapted for faster engraving and cutting, so advanced users can take their business to the next level once again.
| SPECIFICATION | |||
| MODEL | MIRA 5S | MIRA 7S | MIRA 9S |
| Working area | 300×500 mm | 500×700 mm | 600×900 mm |
| Maximum motorised Z-axis height | 140 mm | 140 mm | 150 mm |
| Maximum lifting capacity | 15 kg | 25 kg | 25 kg |
| Laser type/power | DC Glass 45/60W | DC Glass 60/75/80W | DC Glass 60/75/80/90/100W |
| RF Metal 30/60W | RF Metal 30/60W | RF Metal 30/60W | |
| Maximum engraving speed | DC 1200 mm/s, RF 3500 mm/s | DC 1200 mm/s, RF 4000 mm/s | |
| Acceleration | 5G (DC) | ||
| 8G (RF) | |||
| Engine type | DC Stepper (DC) | ||
| AC Servo (RF) | |||
| Maximum resolution of DC source | 1000 DPI | ||
| RF source maximum resolution | 4000 DPI | ||
| Minimum size of letter engraving | 1 x 1mm (RF) | ||
| Positioning accuracy | < 0,01 mm | ||
| Cutting thickness | < 10mm (depending on material and source power) | ||
| Workbench | Koret | Cork + special cutting work surface | |
| Cooling | DC: Water cooler CW3000 | DC: Water cooler CW5000 | |
| RF: Air cooling | |||
| Smoke extraction fan | 60W | 75W | |
| Intergrated air pump | 45W | 85W | |
| Autofocus | Built-in | ||
| Camera | 160° 5 megapixels | 90° 5 megapixels | |
| Safety classification of lasers | Class 1 laser product | ||
| Software | RDWorks (Lightburn recommended, separate paid licence) | ||
| Supported formats | DSP/PLT/BMP/DXF/AI/DWG/SVG (dot, vector and combined) | ||
| Machine dimensions | 900*700*410 mm | 1128*945*510 mm | 1328*1070*530 mm |
| Gross weight | 125 kg | 230 kg | 290 kg |
| Net weight | 110 kg | 180 kg | 220 kg |
| Power supply voltage | 220V AC 50Hz | ||
| Total power | 1200W | ||
| Rotary | Optional (Chuck/Roller) | ||
